snail, slug trap - fast print (vase mode)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
snail, slug trap - fast print (vase mode) You need a glass or PET bottle to add to the printed parts Both the jar and…
- Ocena
- 4,5 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 2
- Wyświetlenia
- 928
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
snail, slug trap - fast print (vase mode)
You need a glass or PET bottle to add to the printed parts
Both the jar and the PET bottle should be smaller in diameter than the width of the rib
The bottom part of the ribs is used for attachment - shorten it as needed and bend it to hold the trap on the bottle
Print the upper part using vase mode
Ribs using normal printing
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Post-Printing
shorten as required
bend as required
Build
add a roof
put on the bottle
bury the bottle - leave the rim of the bottle about 1 cm above the ground, pour the beer
Category: Outdoor & Garden