1 / 3
1/8" SHANK TO 8-32 CHAMBER FACE BRUSH (HK ROLLER-LOCKS)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts your 8-32 cleaning rods to a 1/8" Shank. Excellent at cleaning the chamber face of HK roller-locks (MP5/G3).
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Adapts your 8-32 cleaning rods to a 1/8" Shank. Excellent at cleaning the chamber face of HK roller-locks (MP5/G3) when chucked up in a drill.
Brushes found for cheap on Amazon (search for "1/8 shank end brush) or Harbor Freight.
Hardware (Found @ Ace Hardware):
-2 x 8-32" x 1/8" Set Screws (Short enough to not protrude from body.)
It is possible to thread the holes with the set screws, but I recommend chasing the holes with an 8-32 tap.