1 / 2
3dSets Landy Headlight Lens and Headlight for LEDs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you want to run headlights in your Landy, this else is for you.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 196
- Wydruki
- 2
- Wyświetlenia
- 1026
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (59)Powiązane
Needed a Headlight lens and headlight bowl (modified) with a 5mm hole for leds the 3dSets Landy build. Print with the dome facing up and use supports. You need a small CA glue dab to attach it to the inner headlight housing.