F-35 (Remake)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original print was flawed.
- Ocena
- 4 / 5
- Polubienia
- 77
- Pobrania
- 1006
- Wydruki
- 4
- Wyświetlenia
- 4946
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Public Domain
Original print was flawed. I stitched the pieces together; since there were numerous complaints about the sections were not square and internal support structure pin was irregular. I made this one piece body and reused existing stabilizer fins. This scan still has flaws and have be moved to the bottom of the model. The wings in this print are best printed in the (horizontal) position.
I have a vertical model of this print, slightly smaller, for those interested in both top/bottom with smooth sides. This also exposes the flaws in the wings from the original scan.
Print instructions
This print takes up the length of the bed (x-axis). It is suggested that automated support structures be used.