Ceiling Fan Light Shades - PAWS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement decorative bulb cover for a ceiling fan light fixture. The base diameter measures about 53 mm. I…
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 105
- Wydruki
- 1
- Wyświetlenia
- 538
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a replacement decorative bulb cover for a ceiling fan light fixture. The base diameter measures about 53 mm. I used the the base measurements from the fixture that I have in my living room. It is a generic fixture so I can't say what brand it is. It has three thumbscrews that tighten down on the shade when you insert the base into the fixture.
There are currently 2 designs here, one has the design cut completely through and the 2nd is partially through. I will be adding different designs to this in the near future.
I would not recommend these for use with incandescent bulbs or any bulbs that get real hot.
Sliced with Simplify3D
Original Post 7/23/2019
For the latest on this project and others, join my group:
https://www.facebook.com/groups/3DPrinterModding/
All Tips go back into the projects to be able to support more hardware.
Thank you
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100
Filament: Ziro PLA Snow White
Category: Household