Making flat but bendable models with a slot pattern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Experiments with a slot pattern usually found in laser cutting, to make rigid 3D prints bendy.
- Ocena
- 5 / 5
- Polubienia
- 548
- Pobrania
- 1866
- Wydruki
- 8
- Wyświetlenia
- 9437
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Rigid timber can be made to bend easily when laser cut with a specific pattern. I wanted to try 3D printing with this pattern and I'm pleased to report that it works quite well.
There are three aspects here.
Some models are the results of my experimentation, and you can print them to have a play yourself.
Alternatively, if you want to replicate the pattern in CAD, the images with guidelines and steps should assist.
Finally, the template versions can be imported into your slicer asa modifier to add the bending pattern to existing thin objects.
I have step by step guide to this technique in this video: