1 / 14
LED light-bar attached to the handle for Lerdge IX — zdjęcie 1
1 / 14

LED light-bar attached to the handle for Lerdge IX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed this lightbar handle for a cleaner look and with an organized cable path.

Ocena
0 / 5
Polubienia
20
Pobrania
94
Wydruki
0
Wyświetlenia
615
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

STEP file available  → here

  • Print recommendations 

I recommend printing the Handle and lightbar in PETG or ABS since the handle should be a strong part and the LED tends to get pretty warm (PLA is not recommended because tends to deform shape in heat)

Use 3 perimeters 

More than 50% of infill 

  • Installation

To install you will need the already existing  screws on your Lerdge handle and 2 M3 10 screws

You will also need to get a 24V LED light connected with [JST ph 2 pin] cable and connect it in a slot Named LED in the Lerdge board very easy.

you can buy the LED on Lerdge website or you can make your own if you have solder skills.

If you have a direct extruder you can feed the filaments from the top there's a ball guide for flexible movement of Xaxis

Also in the lightbar, there are holes for screwing the filament sensor on it which you can use the Lerdge filament sensor or any other generic filament sensor. 

  • Cool extra benefit 

Now you have a lightbar and a new Handle Z-lift that will allow you to print 195cm instead of 180, just don't forget to change the setting in your slicer, and in your printer so you can print a little taller

 Enjoy printing in the light!

check youtube video on how it works

Check out my youtube