Anycubic Kobra 2 Roll Hoist
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connector for the Anycubic Kobra 2 Roll holder to keep it level and stable.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 1410
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Spool Holder for the Anycubic Kobra 2 isn't the most stable thing, with a 1kg Spool on it I find it tends to sag, which can impact the filament and stop it from reeling out optimally.
This model is designed to step in and just add a little bit of support to the spool holder that is already there on the unsupported side and keep it relatively level.
The head and the stand itself are separate to help make printing it flat easier. I've placed 2.5mm holes on the back of the stand and spool to allow you to bolt it together. (I partially drilled mine to just around 3mm and used a 16mm M3 bolt to lock the pieces together.
I've printed this in PLA with standard settings at 0.2mm Height.
I've included the STEP files in case you wish to modify this for other uses.