DC-DC Stepdown module case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small case for YWBL-WH DC-DC Stepdown module
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a small case for the YWBL-WH DC-DC Stepdown module to add to my printer to power a Raspberry Pi, so I designed this model.
I made two versions of the case, one that uses M3 Thread Inserts and another where you can directly use M3 screws in case you don't have access to Thread Inserts. You can use the same cover for both cases.
Materials
- 4x M3 Thread Inserts (If you're using the DC-DC-USB Case Thread Insert.stl file).
- 4x M3 screws, two for the module and two for the cover.
- YWBL-WH DC-DC Stepdown module (I got it on Amazon).
Do you like my models? Consider buying me a coffee ;)
Print Settings
Printer Brand:
Anycubic
Printer:
Mega X
Rafts:
Doesn't Matter
Supports:
Depends on your bridge settings
Resolution:
0.2
Infill:
20%
Filament:
PLA/PETG/ABS/ASA/Nylon - Any should be good
Notes:
When adding the screw to the cover, try not to press it too hard. Otherwise, you might break it.