1 / 4
PZEM-004T Housing Energy monitor for arduino micro controller
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple design for housing the PZEM-004T energy monitor.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A simple design for housing the PZEM-004T energy monitor.
You will also need 4 X M3 by 8mm bolts or holding the PCB down and 4 X M3 by 20 for holding the case together.
The bolts self tap in to the plastic and go through the design so could be used for mounting.
I've printed the design in PLA but would work well for Prusa's Prusament PETG V0