1 / 7
Filamentroller for 250 g - 2 Kg bobbins - Sidewinder X1 X2 — zdjęcie 1
1 / 7

Filamentroller for 250 g - 2 Kg bobbins - Sidewinder X1 X2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stable filament roller for the Artillery Sidewinder X2 and X1. Just…

Ocena
0 / 5
Polubienia
4
Pobrania
59
Wydruki
0
Wyświetlenia
486
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

you can find my latest creations here:
makerworld dot com/de/u/430260330

Stable filament roller for the Artillery Sidewinder X2 and X1.

Just another filament spool holder, but ...

no screws, nails, glue, ball bearings or rods from the hardware store or Am@zon!

The original roller is very unstable and can only hold bobbins up to 1 kg. My rollermod can take bobbins up to 112mm wide (up to 4KG bobbins, but not tested - the “Your own risk thing”). I use 2,5 Kg rolls and it fits well. The big rolls fit with the existing ball bearings, only the self-retaining stabilizer is required.

The stabilizer holds the two Artillery metall halves together. The ball bearings don't jump out of the openings and the boobin doesn't fall down.

 

Keep it simple!

Please like everywhere! <3

Category: 3D Printer Parts - Artillery Sidewinder X1 / X2

Tagi