1 / 12
Improved Pulley — zdjęcie 1
1 / 12

Improved Pulley

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an improvement of the original pully with a simple design improvement of a center wheel over the bolt.

Ocena
5 / 5
Polubienia
35
Pobrania
323
Wydruki
3
Wyświetlenia
1094
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a mix of the original pulley and the PC-Blend Prusa Pulley. The wheel over the bold assures that the bolt and the wheel are not connected and cause friction. The wheel is also wider than the wheel so that is gets stuck in the pulley body.  

  • Use M5 x 25 bolts
  • Print with 6 perimeter walls
  • 20% Gyroid infill
  • Preferably in PC blend or PLA CF 

Tagi