VORON SKIRT FOR ANET A8 PLUS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For Anet a8 plus frame
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 1274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
" Read this manual carefully be for installing "
Update
9/7/2023
Insert 150 Frame Brace for Z-Y aluminum profile
Optimize
- Can use center_back to rear_side and use fan support this for center back
- 60x25 or 6020 fan
https://www.printables.com/model/455428-mesh-fan-grills-fan-support-voron-v2-vt/files
- Can close display part with front_center in Optimized folder if you wan't it
- If you y_rod crashed use 25mm Y_rod mods this
https://www.printables.com/model/568581-prusa-y_rod-for-m4x25
Use
1 x DIN912 M3x40
24 x DIN912 M3x8
24 x T-nut M3
4 x 6025 fan (or 2 x if optimized)
Material
PLA / ABS (reccommend for enclosure) / TPU (if you change Voron corner_baseplate)
Readme @!!!!!!!!
- “”Display screen parts it's for "Fysetc Mini 12864 Display" not “Skr mini 1.4 1284 display “”"""
- If you use 4x25 original Y-rod nut. cannot insert 2 x M3 nut in front and back skirt a_b
Must change M4/M3 nut or y rod parts ( reccomend Y-rod prusa MK3s )

- Use soldering iron to close it


Finally i haven't inspiration to more design to VT frame(yes…it can).
"beause it's free design"
Thanks