Z-axis-support for ShenzenTech Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original design of Z-Axis supports for my Prusa i3 derivated Printer from ShenzenTech.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The original design of Z-Axis supports for my Prusa i3 derivated Printer from ShenzenTech.
I made those because i wanted to modify it a little to use models made for standard prusa i3 x carriage (http://www.thingiverse.com/thing:1607001)
Print instructions
Category: 3D Printer Parts Summary
The original design of Z-Axis supports for my Prusa i3 derivated Printer from ShenzenTech.
I made those because i wanted to modify it a little to use models made for standard prusa i3 x carriage (http://www.thingiverse.com/thing:1607001)
Print Settings
Printer:
Prusa i3 China Derivated
Rafts:
Doesn't Matter
No
Resolution:
0.2
30
Post-Printing
Adjustment
Every holes may need to be drill a little.
(While designing it I had considered it was best too tight than too loose)
How I Designed This
UPDATEs:
v1.3: Little positioning adjustment of the holes used to fix the support to the printer.
v1.2: Again: some adjustment of dimensions (Having replace one part I was able to do fine measuring)
v1.1: Better functional dimensioning to match the original ShenzenTech parts.
