1 / 4
Din Rail Clip for CZH Labs F-1013 Raspberry Pi Model B Case v1.0.0 — zdjęcie 1
1 / 4

Din Rail Clip for CZH Labs F-1013 Raspberry Pi Model B Case v1.0.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are based on the Thingiverse model here: https://www.thingiverse.com/thing:3640994 I just added holes of the…

Ocena
0 / 5
Polubienia
6
Pobrania
109
Wydruki
0
Wyświetlenia
801
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

These are based on the Thingiverse model here:

https://www.thingiverse.com/thing:3640994

I just added holes of the correct diameter in the correct locations.

Print instructions

I printed this out of Prusament Galaxy Black PLA on an MK3S with a 0.6 mm nozzle @ 15% infill and 0.15 mm layer height. This is very simple, print it on it's side (not top or bottom).

Tagi