Gottlieb pinball credit add mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gottlieb pins with the appropriate coin door can have a switch attached to the coin reject that will add credits.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount allows you to add a switch to the coin reject mechanism on compatible Gottlieb coin doors. I have installed this on a Roller Disco, it looks like it would also be compatible on any Gottlieb game with a single coin reject plunger for all coin slots. (Examples I've reviewed: Sinbad, Joker Poker, Count-Down, Genie, Mars God of War, Pink Panther, Haunted House, and Punk!) No modification is necessary aside from soldering to the existing coin registration switch so this is no more intrusive than standard pinball maintenance. You can use this with the coin mechs installed but it will be easer to trigger without. It is designed for a roller microswitch (180-5119-02, 180-5168-00, Omron SS-5GL2-FT, Cherry DB1C-B1RC ZF are a few) but may be able to be used with other custom-bent lever microswitches or a simulated roller microswitch.
Parts required:
- One microswitch. Roller lever Omron SS-5GL2-FT was used in the test build.
- One #10 x ½" bolt, with nut and lockwasher for mounting to the coin door.
- Two #2 x ½" screws for mounting the microswitch.
- Wire for attaching to the existing coin switch. Two lengths probably about 8" each, 22 gauge is sufficient.
- (Optional) Zip ties to clean up the install.
Printing:
I printed this in the orientation of the provided STL, with the large face with the bevelled edge on the printing plate. Printed in AnkerMake PLA+ with 10% infill.
Installation instructions:
- Solder the wire leads to the common (probably marked “C”) and normally-closed (probably marked “NC”) terminals of the switch. Use of heat shrink insulation is recommended but may not be necessary.
- Insert the #10 nut into the space provided on the mount and then install the microswitch with the #2 screws on the same side with the roller end away from the nut. The nut may be difficult to install if the switch is installed first.
- Select the install location and remove the coin mechanism if present.
- Solder the other end of the wire leads to the terminals on the coin registration switch; it doesn't matter which lead goes to which terminal. Again, heat shrink insulation is recommended.
- Position the mount block into the coin door bracket and install the #10 bolt with lock washer to hold in place.
- Tidy up the install with zip ties if desired.
Like this model and want to give extra thanks? Consider buying me a beer! https://paypal.me/craigpow