Recursion Modular Drone Race Gates (MultiGP compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print. Combine with 3/4" PVC piping and optional foam to make any style of MultiGP gate/obsticle you want.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 680
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to be used with 3/4" PVC piping of any size. These are meant to be modular so that you can make various different combinations to build any basic track you want using the pieces. Optionally covered with jumbo pool noodles for impact mitigation. Perfect for sub-250 races since the foam will survive quite a beating from that weight class.
First track test using only angled and t-connector:
This is a work in progress. I plan to add more connectors to this as I make/test them.
Print in TPU. Ideally with a lot of walls top/bottom and infil to make them extremely strong and resist flex. I've printed mine with 16 walls and 25% honeycomb infil, which seems to be great. Print on the flat end, 0.2mm layer heights. No support should be required. You may want to print with a wide brim as warping will cause problems getting PVC pipe inserted and you may have to painfully remove material to make it fit otherwise.
Change Log March 26 2024
- Added 4 prong connector to connect multi level gates with other levels.
- Added end stop for storage to keep noodle in place, or for a flag gate.
- Added a straight connector where you can embed a standard PVC connector. Pause job right before the PVC is covered, and insert it in the part while paused. Print 100% infil around that area to ensure there is no adhesion issues. This can be used for hurdles or for dive gates (two connected for each leg).