Fountain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fountain I designed in Fusion 360. Quite simple to assemble you will need a water pump, some tubing, and a power supply.
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 265
- Wydruki
- 0
- Wyświetlenia
- 2750
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Fountain I designed in Fusion 360. Quite simple to assemble you will need a water pump, some tubing, and a power supply. The thing titled "flow slower with holer" is to reduce the flow of water if your pump is too fast. You use it by cutting the tube into two parts and inserting them, leaving a gap for water to go out to reduce flow speed. The thing titled "flow slower" is just an adapter from the hole on the bottom to the fountain to the tube. If you do get the same pump and power supply you won't need to solder anything as they have the same connectors. Also, it looks wayyy cooler if you put some food dye in :)
Parts Used:
Pump: https://www.amazon.com/gp/product/B073XMP2VX/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s01?ie=UTF8&psc=1
Tube:
https://www.amazon.com/gp/product/B000E62TCC/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s00?ie=UTF8&psc=1
Power Supply:
https://www.amazon.com/gp/product/B01GD4ZQRS/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s00?ie=UTF8&psc=1
Print instructions
Category: Sculptures Summary
Fountain I designed in Fusion 360. Quite simple to assemble you will need a water pump, some tubing, and a power supply. The thing titled "flow slower with holer" is to reduce the flow of water if your pump is too fast. You use it by cutting the tube into two parts and inserting them, leaving a gap for water to go out to reduce flow speed. The thing titled "flow slower" is just an adapter from the hole on the bottom to the fountain to the tube. If you do get the same pump and power supply you won't need to solder anything as they have the same connectors. Also, it looks wayyy cooler if you put some food dye in :)
Parts Used:
Pump: https://www.amazon.com/gp/product/B073XMP2VX/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s01?ie=UTF8&psc=1
Tube:
https://www.amazon.com/gp/product/B000E62TCC/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s00?ie=UTF8&psc=1
Power Supply:
https://www.amazon.com/gp/product/B01GD4ZQRS/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s00?ie=UTF8&psc=1
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
</div>Rafts:Doesn't Matter
Supports:
No
</div>Filament:
Hatchbox PLA White