Incense holder with cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a simple incense holder.
- Ocena
- 4,667 / 5
- Polubienia
- 33
- Pobrania
- 308
- Wydruki
- 2
- Wyświetlenia
- 1143
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
This is just a simple incense holder. On the bottom of the stand, there is a hole that a toothpick fits through in case anything gets stuck in the stand. The cover is used when moving the base to prevent ash from flying everywhere. The cover has a small lip near the base and that's the only place you'll need supports, the middle of the cover is optional, however, I did not need any.
Print instructions
Category: Household Summary
This is just a simple incense holder. On the bottom of the stand, there is a hole that a toothpick fits through in case anything gets stuck in the stand. The cover is used when moving the base to prevent ash from flying everywhere. The cover has a small lip near the base and that's the only place you'll need supports, the middle of the cover is optional, however, I did not need any.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:Doesn't Matter
Supports:
Yes
</div>Filament:
ZIRO PLA Marble