1 / 1
Wio Terminal Holder (M3) — zdjęcie 1

Wio Terminal Holder (M3)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wio Terminal holder with 2xM3 screw holes and GPIO access

Ocena
0 / 5
Polubienia
0
Pobrania
40
Wydruki
0
Wyświetlenia
323
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

I used the original model and took out only the Wio Terminal holder. I also added some screw holes at the back, so that this holder can be mounted to a wall or in my case, a robot. All buttons, GPIO pins and ports are accessible, even with a Wio Terminal Battery Chassis

The STL needs to be rotated on your slicer - it should lay flat.

Tagi