Belt chapstick magnet holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses magnets to hold your chapstick on your belt.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 744
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Uses magnets to hold your chapstick on your belt. The chapstick used in the photo is Burt's bee's and the chapstick part is designed to friction fit one with the label on. Depending on your chapstick you may need to add some electrical tape on yours or just glue it in if the fit is not correct. Magnets used are 12x3mm from Amazon.
Print instructions
Category: 3D Printing Summary
Uses magnets to hold your chapstick on your belt. The chapstick used in the photo is Burt's bee's and the chapstick part is designed to friction fit one with the label on. Depending on your chapstick you may need to add some electrical tape on yours or just glue it in if the fit is not correct. Magnets used are 12x3mm from Amazon.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
No
</div>Resolution:0.16
Infill:
25%
</div>Filament:
Prusament PLA Galaxy Silver
Notes:
Print the chapstick holder part with the magnet holes facing down. Print the belt part verticle with the magnet holes facing left or right.