ABS Smoothing Plinth / Table for Glass Jars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Couldn't find a design I was happy with so created this simple model. It is circular to match the profile of jars.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Couldn't find a design I was happy with so created this simple model. It is circular to match the profile of jars. 80mm wide but can be easily resized in slicer. There is a profile at the centre which should make it easier to get a hook mounted. I have designed a small hook that fits the profile with some tolerance. This should ensure the plinth has less wiggle which may be useful for uneven weight distribution.
PETG prefered (especially if heat is being used) but PLA can be used. I have been okay using material which has a colour but I have heard transaparent filaments suffer the least from deteriation due to the acetone.