Aperture Science Wheel center CAP (made for BMW)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some cool Aperture Science Wheel Center caps
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 704
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Some cool Aperture Science Wheel Center caps. I would advise to print in PETG and maybe Anneal it afterwards. Worked well with my MMU2s. I also printed really hot so that the layer Adhesion is good. The Stringing doesn't matter since it will be inside the Rim. They are 68,5mm and fit on my 18" BMW 340i rims. Of course they can be resized though. They are pretty rough and can take a beating, since the click in place Parts reinforced at the base.
I am pretty sure with the right size they will also fit to other brands.
This model is roughly based on Rim Wheel Center Cap BMW Ø65mm by SeriousMt