Spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular holder for thread spools, it will fit into any parametric box and you will never have to chase your spools again
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for the cotton spool on my profile (https://www.printables.com/cs/model/557393-cotton-spool), but should work with most spools.
The holder is a square 16cm x 16cm, so it will fit into any parametric 3D printed box (in fact, any box with a similar size).
It has spaces for 36 spools and 3 additional compartments (1 large and 2 smaller ones) for tools or other (un)necessary stuff. There are also 2 handles for lifting it from a box.
I printed it from some excess Prusament PLA Lipstick Red with 0.2mm layer, 20% infill and the thorns have 100% infill modifier for strength.