Meeting Plates (8 emotions to choose from or print them all)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of useful meeting plates for boring (or not) conversations. Be unique :)
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Intro
Different plates to show you emotions silently on meetings.
| “NO” | ![]() |
| Poop | ![]() |
| “YES” | ![]() |
| Symbols | ![]() |
| Press F to respect | ![]() |
| +1 | ![]() |
| 10 points | ![]() |
| 100 points | ![]() |
What to print
You will need a handle and a plate to connect together.
A "tolerance" note
There two handles with different tolerance. I found that on Prusa Mini 0.1mm tolerance is enough. However, on Bambu 0.1mm tolerance is “one-time assembly”, thus I can't dissasemble the plate back. For this case, there is a 0.2mm handle model.
You can choose whatever you want and just apply a drop of glue (if a connection is a little loss) or use a little force to push the handle into the plate (if its tight).
Color change tip
If you want to print in two colors, just change a color in your slicer on layer 22 (it is 4.4mm on Z).
Print settings
- print with at least 15% infill (the bigger the infill, the less transparent it will look if printing in non-dark filament). I used gyroid infill, you can play around with other types.
- 3 perimeters will make a handle almost solid
- no supports are needed
Work still in progress.







