1 / 6
Print-in-place cable winder "puck", no supports necessary (uses slicer trick) — zdjęcie 1
1 / 6

Print-in-place cable winder "puck", no supports necessary (uses slicer trick)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Inspired by Everydecentnameistaken's cable puck from earlier today, I quickly threw together a similar puck that…

Ocena
4,905 / 5
Polubienia
215
Pobrania
1262
Wydruki
19
Wyświetlenia
5414
Oceny
21

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Public Domain

Inspired by Everydecentnameistaken's cable puck from earlier today, I quickly threw together a similar puck that includes an easier to grip ... grip, and uses the one-layer-high slicer trick rectangles to print easily without supports. (https://hackaday.com/2020/05/17/look-ma-no-support-for-my-floating-holes/)

NOTE: I've marked this is a remix but it's been made from scratch and is not a modification of the original, so the public domain license is intentional

2021-02-09: I added mk6 version which makes a tiny amount extra cut in the center spinner and thins the spinner walls a small amount both sides. My tests with the mk5 version didn't quite fit an entire 2m USB cable rolled into it so this change was made.

Print instructions

Use 0.2mm layer height for the rectangle trick to work.
Turn on Detect Bridging Perimeters for a minor quality increase in those areas. Otherwise, I used the PrusaSlicer default 0.2 quality settings as-is.

Tagi