Energenie RF Switch Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Energinie / miHome single gang UK wall switch adaptor for RF light switches.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Energinie / miHome single gang UK wall switch adaptor for RF light switches.
These require a minimum 25mm back box to fit flush with the wall. All of them in my house are 15mm deep, so this makes up the difference without the need for chiselling out a deeper pocket and installing a 25mm box.
Doubles up as a finger guard around the switch so no mucky finger prints on the wall when you're looking for it in the dark... Of course, you could just shout out 'hey Siri, turn on the lights' :)
Print instructions
Category: DIY Summary
Energinie / miHome single gang UK wall switch adaptor for RF light switches.
These require a minimum 25mm back box to fit flush with the wall. All of them in my house are 15mm deep, so this makes up the difference without the need for chiselling out a deeper pocket and installing a 25mm box.
Doubles up as a finger guard around the switch so no mucky finger prints on the wall when you're looking for it in the dark... Of course, you could just shout out 'hey Siri, turn on the lights' :)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
</div>Rafts:No
Supports:
Doesn't Matter
</div>Resolution:0.2mm
Infill:
20%
</div>Filament:
Prusa Silver PLA