HomeBridge Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand to keep two separate electronics enclosures together (without the need to completely redesign the originals)…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A stand to keep two separate electronics enclosures together (without the need to completely redesign the originals)
Lower component is an Arduino Mega 2560 with Nodo RFLink daughter board and firmware, enclosed in:
www.thingiverse.com/thing:2101477
Printed in Black Real Filament PETG.
Upper component is a Raspberry Pi 3b+ running HomeBridge and Domoticz to add all my unsupported home automation gear to the Apple Home app and Siri. Enclosed in:
www.thingiverse.com/thing:2347758
Also printed in Black Real Filament PETG.
Public link to F360 files:
https://a360.co/2OgjylL
Print instructions
Category: Electronics Summary
A stand to keep two separate electronics enclosures together (without the need to completely redesign the originals)
Lower component is an Arduino Mega 2560 with Nodo RFLink daughter board and firmware, enclosed in:
www.thingiverse.com/thing:2101477
Printed in Black Real Filament PETG.
Upper component is a Raspberry Pi 3b+ running HomeBridge and Domoticz to add all my unsupported home automation gear to the Apple Home app and Siri. Enclosed in:
www.thingiverse.com/thing:2347758
Also printed in Black Real Filament PETG.
Public link to F360 files:
https://a360.co/2OgjylL
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
</div>Rafts:No
Supports:
No
</div>Resolution:0.2mm
Infill:
10%
</div>Filament:
Prusa Silver PLA Silver