Modified Clough42 ELS Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed lid and spacer for the ELS project, as the LED&KEY TM1638 module I purchased from eBay had different hole…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Remixed lid and spacer for the ELS project, as the LED&KEY TM1638 module I purchased from eBay had different hole spacing. Also the LEDs along the top are too close to the 7 segments to allow the top mounting holes to align with the spacer.
These parts fit this module:
https://www.ebay.co.uk/itm/1X-8-Bit-Digital-LED-Tube-8-Bit-TM1638-Key-Display-Module-For-AVR-Arduino-T-A6B1/232998927941?ssPageName=STRK%3AMEBIDX%3AIT&\_trksid=p2060353.m1438.l2649
All that has changed is that the LED holes in the spacer have been shifted down by .5mm, and the lower mounting holes in both parts have moved down by 2.4mm
Print instructions
Unassociated tags: Electronic Lead Screw
Category: Machine Tools Summary
Remixed lid and spacer for the ELS project, as the LED&KEY TM1638 module I purchased from eBay had different hole spacing. Also the LEDs along the top are too close to the 7 segments to allow the top mounting holes to align with the spacer.
These parts fit this module:
https://www.ebay.co.uk/itm/1X-8-Bit-Digital-LED-Tube-8-Bit-TM1638-Key-Display-Module-For-AVR-Arduino-T-A6B1/232998927941?ssPageName=STRK%3AMEBIDX%3AIT&\_trksid=p2060353.m1438.l2649
All that has changed is that the LED holes in the spacer have been shifted down by .5mm, and the lower mounting holes in both parts have moved down by 2.4mm
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
No
</div>Resolution:0.2mm
Infill:
10%
</div>Filament:
[
REAL Filament PETG ](http://www.amazon.com/s?url=search-alias&field-keywords=REAL+Filament+PETG&tag=tvad0304-20) Black
Notes:
Sliced with Prusa Slicer 2.1 with Pretty PETG V3 (7x7) config.
If required, you can print out the decal svg file and stick to the front of the case. Use a light behind the decal once printed out on a label (I suggest Avery heavy duty laser labels as they are oil and water proof) to align it to the lid. Then use a craft / xacto knife to cut along the dotted lines and the perimeter to remove the unwanted parts.