RETRO TUBE TV LITHOPHANE BOX

Parts needed:
Bulb:
- Candelabra Smart Bulb E12 LED Smart Light Bulbs WiFi RGB Color Changing Smart Lights That Work with Alexa Google Home Music Sync Tunable White 5W.
(https://www.amazon.com/dp/B08XYZK7XT?psc=1&ref=ppx_yo2ov_dt_b_product_details)

Lampholder:
- LP1970 Phenolic Candelabra (E12) Base Sockets with 1.25" Shoulder & Screw Ring - 8" Wire Leads
(https://www.amazon.com/dp/B00WZUAO6I?psc=1&ref=ppx_yo2ov_dt_b_product_details)

Switch:
- Latching Rocker Switch ON/Off SPST 2 Pin 2 Position Car Auto Boat Rocker Toggle Switch Snap AC 250V/16A 125V/20A KCD3-101-ON/OFF
(https://www.amazon.com/dp/B0B6QWBL5Y?psc=1&ref=ppx_yo2ov_dt_b_product_details)

Electrical connector:
- IEC320 C8 2-Pin Male Plug Power Socket Connector AC 250V 2.5A Screw Mount Adapter
(https://www.amazon.com/dp/B09X74LHSV?psc=1&ref=ppx_yo2ov_dt_b_product_details)

Cord:
- IEC320 C8 2-Pin Male Plug Power cord
(https://www.amazon.com/dp/B0025ZPX6O?psc=1&ref=ppx_yo2ov_dt_b_product_details)

Copy and paste these descriptions in Amazon

3D PRINTING SETTINGS

Difficulty level: Intermediate

The tube tv light box components are printed with E-Sun PLA, but other brands should work fine.
Layer Height (light box parts): 0.2mm
Infill: 10 to 15%
Supports: Yes

The lithophane is printed with E-Sun white PLA, but other brands should work fine. Use Warm White, Cold White, or White.
Layer Height (lithophane) 0.12mm
Infill: 100%
Supports: No, but a raft is suggested
Speed:30-40mm/s
Print lithophane panel in upright position

Website to create custom lithophane:
Lithophane Maker.Com

Settings to create a lithophane that fit the Tube TV:
Picture: anypicture.jpg
Frame Options: Frame Only
Lithophane Resolution: 0.2
Base Length: 150
Base Width: 7.5
Base Height: 7.5
Overhang Angle: 60
Maximum Thickness: 3.0
Minimum Thickness: 0.6
Height: 120
Support Thickness: 2
Support Angle: 75
X Shift: 0.5
Y Shift: 0.5
Rectangle Scale: 1.0