Bladed spoke holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
More ergonomic and easier to use aero spoke holder for use when building or tensioning bicycle wheels with bladed spokes
- Ocena
- 4 / 5
- Polubienia
- 2
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 679
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a much easier to use and better bladed aero spoke holder designed specifically for 0.9mm spokes but works well with 1.1mm. Design was entirely made with shapes in Prusa Slicer… really quite simple! different width spokes are easily accommodated by changing the width of the negative space in the model.
I found it best used in my left hand with my thumb on the flat flag, fingers wrapped around the back of the tool, the tool on the far side of the spoke from me, and the tool’s opening facing me with the flat flag at the top. Used this way, it’s easy to apply minor adjustments to the spoke’s angle of attack without twisting and damaging the spoke.