Hyperpixel 4 screen console for Mk3s (No Prusa Text)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from madalpaca's thing - I was having issues printing the text, as the small inner portions of the letters…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 1690
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remixed from madalpaca's thing - I was having issues printing the text, as the small inner portions of the letters just didn't want to stay put on the print bed.
Only the console front panel has changed, and only to remove the text. Everything else is exactly the same as the original thing. This is for a Hyperpixel 4, with a raspberry pi3b.
Follow the instructions on the original thing regarding assembly and running power to the pi, and for additional parts if you wish to use a PI4 or add an external buck convertor for the 5v supply (I already had a buck converter added inside the PSU shroud, so I didn't need this)
My thanks to madalpaca for creating and sharing the original thing. It's awesome. :)
I highly recommend the squash ball feet that you can see on my printer too - they raise it up perfectly to account for the larger console and it's supports.
https://www.prusaprinters.org/prints/48010-squahball-mk3s-vibration-damper
Print instructions
Category: 3D Printer Parts Summary
Remixed from madalpaca's thing - I was having issues printing the text, as the small inner portions of the letters just didn't want to stay put on the print bed.
Only the console front panel has changed, and only to remove the text. Everything else is exactly the same as the original thing. This is for a Hyperpixel 4, with a raspberry pi3b.
Follow the instructions on the original thing regarding assembly and running power to the pi, and for additional parts if you wish to use a PI4 or add an external buck convertor for the 5v supply (I already had a buck converter added inside the PSU shroud, so I didn't need this)
My thanks to madalpaca for creating and sharing the original thing. It's awesome. :)
I highly recommend the squash ball feet that you can see on my printer too - they raise it up perfectly to account for the larger console and it's supports.
https://www.prusaprinters.org/prints/48010-squahball-mk3s-vibration-damper
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
No
</div>Resolution:0.2
Infill:
15%
</div>Filament:
Sunlu PETG Black
Notes:
Use a brim to prevent the ends of the part curling.
You will need to print this at an angle on the print bed for it to fit. Rotate it in the slicer until it doesn't complain.