Zortrax M200 Perforated Plate Connector Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I know some people accidentaly hit the connector of the perforated plate on the print platform with their spatula. I…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I know some people accidentaly hit the connector of the perforated plate on the print platform with their spatula. I recently also had this happen and I always try to be careful with that sharp thing.
If the connector gets damaged the table hight isn't detected and crashes into the nozzle.
So I made this little bumper/shield for the Zortrax M200 that hopefully prevents some damage, you can just print it again if the bumper gets damaged.
I used some super glue to glue it to the perf board.