Teyes GPS Bracket for Pajero
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to mount the GPS receiver on your Teyes CC3, CC2, SPro etc. in a Mitsubishi Pajero from 2007-2021
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Teyes makes some great navigation units, but on a Pajero there's not much flat space to mount the GPS receiver.
This bracket gives you a perfectly-sized shelf to suit the supplied GPS. It's been tested to remain well-clear of the back of the CC3 2K and there is a notch on the back to allow the cables from the trip computer to clear without any chafing whatsoever.
Tested on a Gen 4 Mitsubishi Pajero/Shogun/Montero but the Gen 3 (2000-2006) has a very similar interior so it may work, but you'd need to test this.
Enjoy! :)