Luciteria 10mm Display Case Periodic Table Wall Mount Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall brackets that fit the basic periodic table from Luciteria.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Share Alike
Fits this display from Luciteria: https://www.luciteria.com/displays/10mm-display-case
I made these wall brackets to be able to mount my periodic table on the wall. It angles the table slightly back towards the wall to keep everything in place, but use at your own risk! Bumping it hard can still knock things out so be careful and consider mounting it above a desk or place where it's harder to bump into accidentally.
No supports are needed if you print with the bottom on the build plate. I recommend clear PETG because it fits the style, but ASA, or PLA+ would also work. I made the bracket a bit thin for the translucent effect, but I included Fusion360 and step files in case you want to remix it to make it more sturdy for regular PLA.