quick low-poly trophy and base (vase mode)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a small and quickly printable trophy and a matching base, using 4g of filament each
- Ocena
- 4,875 / 5
- Polubienia
- 272
- Pobrania
- 1573
- Wydruki
- 11
- Wyświetlenia
- 5736
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
While my previous vase-mode trophies included two low-poly designs, I find their patterns to be too regular for true low-poly aesthetics, so I made a new one that matches that style more, and a fitting base. I didn't mark it as a remix, because I used a completely different approach to create this polyhedron, and I learned something new on the way.
Trophy and base use only 4g (1.4m) of filament each, so they may be a good use for some last meters of filament (like most vase mode things). Scale as needed.
Printing
Use vase mode. I used a 0.4mm nozzle with 0.6mm extrusion width on my Prusa Mini, with Bronze Prusament. I use 0.2mm layer height and 3 or 4 bottom layers.