Anycubic Predator Carriage Adapters for Haydn Huntley's MagBall Arms Modified
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the carriage adapter created by Haydn Huntley for the Anycubic Predator THANKYOU Hayden for a great…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the carriage adapter created by Haydn Huntley for the Anycubic Predator THANKYOU Hayden for a great design !!
Please look at his design for instructions and effector adapters you will need.
I found that if you try to install the stock metal sensor brackets and I tried on my predator it was slightly too short on my machine.
Looking at the very top of the bracket you will see stock the tops are even if you look at the picture there is a few examples far left is original design middle is mine and far right is stock.
I made this mostly to help the people that want to use the metal sensor bars while I was there I made a few other adjustments.
The original design will work and ran good once I printed it with the plastic blade the metal blades didn't have enough distance on my machine.
I added 2.5 mm to the top to make it even like stock, made a slight recess for the screw holding the springs looks nicer adds a bit more room if the sensor needs it, I also
made the screw hole slightly smaller wanted more bite into the screw holding the springs.
I kept the stock plastic sensor blade the same size it works and recommend to use that style rather then the metal blade.
Enjoy
Category: 3D Printers