1 / 2
Modix Big 60 dual fan adapter and Improved fan shroud — zdjęcie 1
1 / 2

Modix Big 60 dual fan adapter and Improved fan shroud

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modix big 60 is a great printer but could always be improved. Cooling down the part on only one side was adequate but…

Ocena
0 / 5
Polubienia
2
Pobrania
36
Wydruki
0
Wyświetlenia
320
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Modix big 60 is a great printer but could always be improved.

Cooling down the part on only one side was adequate but sometimes it would look a bit funky on the no fan side.

I made this adapter so you can add another blower fan to the other side. Since the plug is already in the wire bundle you just get screws a new fan and plug it in.

I used a nyloc nut for the attachment to the fan to the adapter on one side since it has room but the other hole for the fan has no room so find a screw that will sit flush to the plate and just screw down the fan to the adapter without peeking through the other side of the adapter since you would be hitting the carriage if the screw is too long.

I made adjustments to the stock blower fan the original had a big gap on the side not sealing properly so made everything a little tighter.

Let me know how you like it.

Category: 3D Printer Accessories

Tagi