Filament spool shelf with 22mm rod ( 1/2" PVC)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Olo Deepdelver's filament spool shelf system V2. I modified it so it can fit 1/2 inch sch40 PVC pipe
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 204
- Wydruki
- 5
- Wyświetlenia
- 884
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Olo Deepdelver's filament spool shelf looks real nice, but when I tries to print it I do not have enough dowel with me.
But I have quite a few 1/2" sch40 pvc pipe ( you can find these at 10ft for ~ $4 USD in home depot or lowes )
So I mod the short bracket to use 22mm hole, which take these 1/2" pvc pipes nicely ( almost 22mm od )
I also added a side mount bracket, as I am starting this shelf from the side of a existing cabinet.
For the sag.. My studs are 24" apart, I am setting it up for about 68" run with 3 bracket and a wall side bracket. The 1/2" pvc is able to hold on with all the filament that can fit on it. There is a little bit of sag but overall holds up well enough. If your wall has shorter stud spacing you should have no problem with sagging at all.
Now that I have space.. Gonna see a lot more filament order now…
