Breville/Sage Dose Control grinder single dose hopper with bellows
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the "Breville Dose Control grinder single dose hopper" by Dix4 that I modified to use the hopper…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 1078
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a remix of the"Breville Dose Control grinder single dose hopper" byDix4 that I modified to use the hopper fromBreville/Sage Single Dose Hopper With Groove for Bellows designed byHarryDavidson. I some unmodified files of theirs are also provided in this design but I tried to label them as clearly as possible. (Would label this as a remix but thingiverse doesn't work properly)
I initially printed the hopper not realizing that it wouldn't work with my Dose Control grinder. The 2 files provided are the same for the most part however the one marked with "_tight" has the middle hole at 39mm and the other one at 40mm. In the future it might be worthwhile to make a second version of this where it's all in one piece (since I already had the hopper printed it wasn't that high of a priority for me).
While designing I went with 40 however after printing I found that the fit could be tighter. I didn't print the tighter version yet so some light sanding might be necessary. The regular version works fine and if the looseness bothers you it can be fixed by gluing the parts together.
The Fusion 360 file is also provided to anybody wanting to do a remix (however it's a little messy).
Post-Printing
The ring goes just simply on top of the burrs with the adapter going on top. Push lightly down and twist to lock. The hopper simply slides into the hole (on glue it in before installing the adapter).
Category: Kitchen & Dining