Sparco Belt Guide Curvature Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool to measure the curvature of your Sparco Bucket Seat for flush sitting 3D printed Belt Guides
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v2.0
In addtion to https://www.printables.com/model/558486-simracing-belt-tensioner-sparco-belt-guide-roller- this includes a measuerment tool for your caliper to determine the curvature of your bucket seat. Draw the Surface from the Seat and trim the included Part accordingly. The Offset from the measurement Surface from the measurement tool and the Back surface of the Belt guide is 5.5 mm, this value needs to be substracted from all measurements.
Use M3 Bolts and Nuts to connect the Counterplate and the measurement tool. then use M6 Bolts to make the Counterplate sit flush with the inside of your seat (use Pressure discs under the screws to not scratch your seat). Then use your caliper the measure the distance to the seat surface in each hole and recreate the surface in your CAD-tool.