1 / 6
3D Printable Garages for Hot Wheels (and similarly sized car toys!) — zdjęcie 1
1 / 6

3D Printable Garages for Hot Wheels (and similarly sized car toys!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,44 € – 1,76 € netto (bez VAT)

Dla pliku: Car Garage Small v51_0.15mm_PLA_MINI_1h56m (1).gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,60 € netto (środek widełek).

Masa podana przez autora
13 g
Czas druku podany przez autora
1,93 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

It can be stacked upwards, so it can be displayed like a tower!

Ocena
5 / 5
Polubienia
271
Pobrania
1379
Wydruki
4
Wyświetlenia
12 373
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have made a garage for small cars! Especially made for Hot Wheels -sized cars, the garage is available in two sizes.

The small one for most of the cars, and the tall one for taller cars!

It can be stacked upwards, so it can be displayed like a tower!

It can also be connect another garage on its back or front, and this is very useful to put your favorite toy car collections in a shoe box! AND YES! It means you can now place your cars vertically to utilize the shoe box space in full, and without cars hitting on each other!!!

I have made over 50 prototypes for this garage, and made adjusted as small as 0.02mm, and a few months to complete!

 

Here is the STL file for printing one small Car Garage and one big Car Garage. Also there is a GCODE file optimized for the Prusa Mini printer, and for this it takes approximately 2h 10m to print.

Recommended to print it with the PLA filament.

 

Internal dimensions:

-Small

 Width: 77.95 mm

 Depth: 40.00 mm

 Height: 25.999 mm
(*if you don't put another garage on top of it, you can basically put a tall car inside. The height becomes a limitation only when you put another garage on top.)


-Big

Width: 77.95 mm

Depth: 40.00 mm

Height: 43.899 mm

Tagi