3M command wall hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3M command strip wall hook designed for a large strip and to take on a little bit of weight.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My daughter decided we needed to hang her stuffed bear trophy head, and I really didn't want to drill a hole in a super hard concrete wall for that. So figured a 3M command hook should work. But couldn't find any hooks that fit the bear head well. So had to design one.
It's made for a large 3M strip, with the hook positioned to spread the weight of the bear head as evenly as possible across the whole strip.
Did it work? Yes it worked great. Easy to hang the bear head, and both the hook and the strip are holding up nicely.
I've printed it with eSun PLA+, 25% infill. Should work just fine with just about any PLA. Do PETG for additional strength, but I'd say the 3M strip will fail before the hook does.