Irwin Quick-Grip clamp adapter for 90deg frame corners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts a regular Irwin Quick-Grip clamp to a corner clamp.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 277
- Wydruki
- 1
- Wyświetlenia
- 980
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Convert your Irwin quick-grip clamp for use on corners, be that picture frames cut at 45deg or 2 x square cut planks.
Simply remove the standard rubber clamp boots and slide on the precision-fit clamp ends.
It's made to fit tight but can be removed. The one side is bevelled to facilitate fitment onto the clamp. There's some relief around the corner area itself, to prevent small imperfections from compromising the overall fit.
Wall thickness at 2mm and 40-50% fill will provide adequate strength, as corners typically do not require excessive clamping force, i.e. the clamp merely serves to hold two pieces in position.
Edit, 15.Nov.2023 → One more thing - please pop back in and share your print! :)