Axial SCX6 - Wheel Chocks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you're travelling with your SCX6 and need to stay in place, these could really help.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I travel a lot with my SCX6 in the trunk; it moved around a lot on its tray. Adding these kept it in place.
You'll need to print two per wheel; you'll also need some ¼in rope/para-cord to connect them. I found it best to put the chocks around the wheels and then cut the rope so you can make knots and cut to length accordingly; you want a pretty tight fit.
You're looking at about 5hr 45min on a MK2.5S and 2hr 20min on a X1C. I'd recommend 20% in-fill and 3 walls as these will need to be pretty tough. I've found PLA thus far is though up to the task.