Vaccine vial holder - (Pfizer BioNTech / Moderna / AstraZeneca)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vaccine Vial Holder for PfizerBioNTech vials based on model created by: Ales Padrta and Zapadoceska Univerzita for…
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 346
- Wydruki
- 0
- Wyświetlenia
- 2075
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Vaccine Vial Holder for PfizerBioNTech vials based on model created by: Ales Padrta and Zapadoceska Univerzita for hospital in Rokycany (https://rokycansky.denik.cz/zpravy_region/rokycanska-nemocnice-vyresila-problem-s-nestabilni-vakcinu-ma-drzaky-z-20210121.html https://www.thingiverse.com/thing:4730597)
15.2.2021 - Added Vial Holder for Moderna and AstraZeneca vaccines, this holder can be used for both brands.
INTEDED USE: in normal refrigerator, NOT in freezer with extremely negative temperature.
I had problems printing the original model because of fillets used in corners. As this is a relativlely short path i decidet to try to brigde that.
Beside that i tried to optimalize the model for 0.3 layer height and extrusion width settings in default 0.3 layer Draft profile from PrusaSlicer for 2 lines.
Thanks to that the print time went down from approx 1h 33m to aprox. 55 minutes for single item.
Print instructions
Layer: 0.3mm
Default Extrusion width: 0.5mm
First layer: 0.42mm
Perimeters: 0.5mm
External perimeters: 0.6mm
Infill: 0.5mm
Solid infill: 0.5mm
Top solid infill: 0.42mm
No supports
Infil: Doesn't matter