Oneplus 3 TPU Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU case for Oneplus 3/3T. The model works great, but there is always room for improvements.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 362
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TPU case for Oneplus 3/3T. The model works great, but there is always room for improvements. So feel free to optimise the case.
I do have a phone mounting system glued to the rear of the device. Thats why there are two versions of the files. One has a large cutout on the back, tho other one doesn´t. The gcode has the cutout on the back. So please slice yourself, if you don´t need it.
Print instructions
The model was printed in NinjaFlex TPU. I used most of the print settings from Mre´s NinjaFlex profile. You can check it out here:
https://www.prusaprinters.org/prints/12586-ninjaflex-profile-zero-stringing-flawless-print-be
I had to remove a lot of support structures with a cutter knife, so don´t expect too much of the optical Quality, when printing with TPU.