Subaru EJ253 Valve Stem Seal Puller/Installer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this tool to safely remove and/or install valve stem seals on your Subaru engine (and possibly others).
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 597
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It can be a bit tricky to get the tool lined up, but once you do you should feel it ‘snap’ onto the seal. Gently rock the tool back and forth as you pull and the seal will eventually release.
Installation works the same, just in reverse. Gently rock the tool back and forth as you push and you should feel the seal ‘pop’ onto the stem.
Printing Hints:
PLA works well as long as you increase your Perimeters to 5, and use Rectilinear infill at 30%. Valve stem seals on old engines can be incredibly stubborn, so these values should be considered the minimum.