Space Stationery - Pen Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your two favorite writing utensils ready for liftoff with this Space Shuttle Pen Holder
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Introducing Space Stationery! The Space Shuttle Pen Holder
Perfect for holding your two favorite pens.
Includes Print in Place model and individual part models.
Prints vertically, Supports are required.
20% Support Density, 20-Degree Overhang
Min. 10% Infill Density.
Build Plate Adhesion: Brim (Mainly for the tiny supports under the rear wing)
If the Boosters or Orbiter become detached while removing the supports, you can super glue them back on like I had to with the Orbiter.
However, the issue with them detaching should be fixed with the current version.
Any tips on how to improve this model would be greatly appreciated!
Thanks to Omer Meshy for the original models.