1 / 4
Renault Trafic_Opel Vivaro_Nissan Primastar - air vent vertical parts — zdjęcie 1
1 / 4

Renault Trafic_Opel Vivaro_Nissan Primastar - air vent vertical parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The vertical elements: long/large blades and the flexible ruler on the side that hold the little horizontal flaps.

Ocena
5 / 5
Polubienia
44
Pobrania
642
Wydruki
0
Wyświetlenia
2483
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

A friend of mine had used all kind of air vent supports and finally the air vent blocks of his renault trafic were completely broken. I found on internet many version of the little horizontal blades but not the long vertical ones. Thanks to Knaudler that shared his fusion files, I have been able to create mine. I am a brand new user of fusion and it was really, really a very good exercise to learn a little bit more about its usage…

On the full project I used : 
- additionally to Knaudler model, I also foud this one and this one usefull.
- for the button and the specific blade that fits into it : this design 
- a LOT of sanding paper and patience 

The blades were printed ASA, 50% infill with suports (I think my design could use some reshape to be ble to be printed without support, but it's definitely not yet in my knowledge)

The vertical ruler is printed with Flex prusament, no support, 50%infill. 
 

Tagi